Hardware Parts Description

You are here:
< Back

Hardware Parts Description

List of the main hardware components for XenoCube.

  • 20mm x 20mm extrusion bar
  • 8mm drill rod
  • M3 screw set
  • 8mm Threaded Lead Rod 2mm pitch
  • 5mm to 8mm coupler
  • 1/4″ acrylic sheet – This is used for the top and bottom sections as the 1/4″ is perfect fit for extrusion bar.
  • 1/8″ acrylic sheet – This is as the main pieces of glass as when inserted in extrusion bar, it leave a little bit of a gap to allow wire routing.